Insertion Magnetic Meter, ALMAGIS Smartmeasurement, Smart Measurement Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

Insertion Magnetic Meter, ALMAGIS

           

The SMC ALMAGIS is an insertion electromagnetic flowmeter designed to measure the fluid velocity of conductive liquids in applications where hot-tap or insertion installations are preferred. This insertion mag meter is available in four standard lengths and may be installed in any pipeline with internal diameters ranging from 300 mm (12") to3000 mm (120")and in permanent locations where cost or space limitations preclude the use of conventional in-line style meters. Pipe connections come in hot-tapped, DIN and NPT threads. The ALMAGIS is designed for use conductive fluids including water, raw sewage, and wastewater, clarified water, RAS, and WAS, primary sludge and cooling tower water, as long as adequate lengths of straight pipe are available where the sensor is installed.

 US Catalog

Size 6"~120" (150-3000mm) Measuring Range 3-33 fps (1 - 10 m/s); bi-directional Temperature 160 °F (70 °C) max. Pressure 230 psig (1.6Mpa) max. Wetted part Stainless Steel #304 Protection IP 67 Materials (std) Transmitter housing : Aluminium Probe : SS #304 Detector housing : SS #316L Conductivity must be = 50 µS/cm

Cable Entry 2 X PG11 Ambient Temperature -13 to 140 °F (-25 to 60 °C) Connection Weld, Flange, thread and ball vavle Coil Resistance 50~70 O (std) Accuracy ±2.5% of reading Power requirements 24 VDC, 110-220 VAC Outputs Analog : 4-20mA, PulseDigital : RS232/485, HART, Modbus-RTU, Profibus-DP