SP Insertion Thermal Meter, ATMF8000IS Smartmeasurement, Smart Measurement Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

SP Insertion Thermal Meter, ATMF8000IS

           

SmartMeasurement’s ATMF8000 insertion mass flowmeters are thermal dispersion type, utilizing the constant temperature difference method of measuring Gas Mass Flow Rate. It contains two reference grade platinum RTD sensors clad in a protective 316 SS sheath. Features include direct mass flow for gases , wide rangeability, low pressure drop, excellent low-end sensitivity, and no moving parts. The SMC ATMF series is microprocessor based; it does not have any potentiometers. The electronics can be integral or remote mount with a rugged, windowed dual-compartment enclosure. Four models available ranging from the low cost blind meters to the full-featured SP models.

Each flow meter has built in diagnostics - a display of the calibration milliwatts (mw) can be used to check the sensor’s operation by being compared to the original reported “zero flow” value noted on meter’s Certificate of Conformance metallic tag. This convenient field diagnostic procedure verifies that the original factory calibration hasn’t drifted, shifted, or changed. This “Sensor Functionality and Zero Self Check” also verifies that the sensor is free from contamination, even without inspection.

  Metric Catalog

Process Connections Threaded, Flanged, Ball valve Process temperature 0 to +455°C Operating pressure 69 barg (1000 PSIG) Velocity Range 0.07 to 203 normal meters per second Accuracy ±[1% of Reading +(.5% FS)] Repeatability ± 0.25% of Full Scale Turn down ratio Better than 100:1 Material 316SS, Hasteloy C and other options available Signal output 0-5 VDC & 4-20 mA

RAM Back-up Lithium Battery, 3.6VDC Housing protection IP65; IP67; IP68 Ex-protection II 2 GD EEx d IIC T2 or T3 Cable 32' (10 m) free for remote version Weight Integral (4kg) remote to 7 Kg, SL (less than 2 kg) Signal Interface RS232 & RS485 Display units NCMH, kg/hr, SCFM, Lb/hr Power supply 110/220 VAC 24 and/or 12 VDC Data storage EPROM storage up to 5 years